Classification |
Dimensions
(A) |
Dimensions
of top tape extension
(B) |
Dimensions
of bottom tape extension(C) |
Closed-end
zipper |
From
the top end of the slider to the tip of the bottom stop |
From
the top stop to the to the tip of notches of the cut end
|
From
the bottom stop to the tip of notches of the cut end |
|
Zipper
with double sliders (arranged in head to head relation) |
From
the tip of one bottom stop to the tip of the other bottom stop |
From
the upper bottom stop to the tip of notches of the cut end
|
From
the tip of the bottom stop to the tip of notches of the cut
end |
|
Zipper
with double sliders (arranged in bottom-to- bottom relation) |
From
the top end of one slider to the top end of the other slider |
From
the top stop to the tip of notches of the cut end
|
Same
as the top tape extention end portion |
|
Open-end
zipper |
From
the top end of the slider to the tip of the box |
From
the top stop to the cut end
|
|
|
Two
way separator |
From
the top end of the slider to the bottom end of the supplementary
tape |
From
the top stop to the cut end
|
|
|
Top
open zipper |
From
the top stop to the tip of the box |
From
the top stop to the cut end
|
|
|
Reversible
slider |
Rather
than from the top end, measurement should be made from the shoulder
inlet portion of the slider |
From
the top stop to the cut end
|
|
|
When
the top stop does not enter the slider |
Measurement
should be made from the top stop |
From
the top stop to the tip of notches of the cut end
|
|